Sliding doors with one or two rigid leaves model SLIDING DOOR GOLD with upper and lower profile made of zinc-coated steel painted black with structural panels made of internal perimetral sash, of zinc-coated rectangular profile, covered on both sides with metal sheet 6-7/10 mm thick, pre-painted in Isotek standard colors (White-grey similar with RAL 7035/9002, other colors upon request), protection of the surface with semi-adherent film to be removed after installing (care of the installer after the pose); internal insulating material 50 mm thick fire-proof class 1 (extruded polystyrene - Styrofoam), density 35 kg/m3.

The leaves are joined on height by an ?H?-shaped junction aluminum profile painted White-Grey for White Grey doors, black with other colors.

The doors are completed with EPDM rubber beating gaskets (?male?) inserted in the internal spaces of the panel that shall join with the (?female?) gasket inserted on aluminum profile fastened on the side steel sustaining mullion, painted Black (for single-leaved gates), side closing gaskets with beating wing that meet the 50 mm nylon brush inserted on a sustaining profile of 90° of fastening in the wall.

Upper breach-proof guiding system zinc-coated and painted black with fastening brackets, chariots in the upper side of the leaf, lower portable rolls with fixed-chambered double ball bearing.

Every leaf has two portable lower rolls with fixed-chambered double ball bearings, an internal closing system completed with a rod on the lower side, (for gates with manual opening), ready for the insertion of an internal pulling handle, black straight external handle of 20 mm tubular bar with fastening plate, black nylon lower and upper brush inserted on aluminum sustaining profile.

For the double-leaved gates, the closing is made with ?male-female? central gaskets inserted on the special spaces inside the panel, side closing gaskets with beating wing that meet the 50 mm nylon brush inserted on a sustaining profile of 90° of fastening in the wall, with 90 mm guiding axel.

Gate weight: approx. 30 Kg. / m2 invoicable.