Sliding doors with one or two rigid leaves model SLIDING DOOR SILVER with structural panels made of internal perimetral sash, of rectangular profile of zinc-coated steel, covered on both sides with metal sheet 6-7/10 mm thick, pre-painted in Isotek standard colors (White-grey similar with RAL 7035/9002, other colors upon request), protection of the surface with semi-adherent film to be removed after installing (care of the installer after the pose); internal insulating material 50/60 mm thick fire-proof class 1 (extruded polystyrene - Styrofoam), density 35 kg/m3.

The leaves are joined on height by an ?H?-shaped junction aluminum profile painted White-Grey for White Grey doors, black with other colors, on the upper and lower side.

The doors are completed with EPDM rubber beating gaskets (?male?) inserted in the internal spaces of the panel that shall join with the (?female?) gasket inserted on aluminum profile fastened on the side steel sustaining pillar, painted Black (for single-leaved gates), side closing gaskets with beating wing that meet the 50 mm nylon brush inserted on a sustaining profile of 90° of fastening in the wall, beating gasket profile.

Upper carrying guiding system painted black with fastening brackets, carrying 4-wheeled chariots and axel of 20 mm in diameter fastened upper to the leaf with special nut, welded on the frame.

The lower sliding is made with a plastic wheel with a fastening plate for burying in the floor. Every leaf has an internal closing system completed with blocking rod buried in the floor, (for gates with manual opening), ready for the insertion of an internal pulling handle, black straight external handle of 20 mm tubular bar with fastening plate, black nylon lower and upper brush inserted on aluminum sustaining profile.

For the double-leaved gates, the closing is made with ?male-female? central gaskets inserted on the side spaces inside the panel, side closing gaskets with beating wing that meet the 50 mm nylon brush inserted on a sustaining profile of 90° of fastening in the wall, with 90 mm guiding axel.

Gate weight: approx. 30 Kg. / m2 invoicable.